BWTJT - 2130 QD CONTACT CLEANER AEROSOL
- MSDS: BWTJT
- Manufacturer: CRC INDUSTRIES INC
- Product Name: 2130 QD CONTACT CLEANER AEROSOL
- National Stock Number: 6850-00F027425
Product Identification
Product ID:2130 QD CONTACT CLEANER AEROSOL
MSDS Date:03/29/1993
FSC:6850
NIIN:00F027425
MSDS Number: BWTJT
Responsible Party
WARMINSTER, PA 18974
US
Emergency Phone: 215-674-4300
Info Phone: 215-674-4300
Preparer: JON BROWN
Cage: CRCIN
Contractor
Telephone: 215-674-4300/800-424-9300
Cage: 10136
Ingredients
ETHANOL (ETHYL ALCOHOL), TECSOL, ALCOHOL
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 5-10%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
HEXANE, N-HEXANE
CAS: 110-54-3
RTECS: MN9275000
Fraction By Weight: 5-10%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
2-METHYL PENTANE
CAS: 107-83-5
RTECS: SA2995000
Fraction By Weight: 70-80%
ACGIH TLV: 500 PPM
CARBON DIOXIDE
CAS: 124-38-9
RTECS: FF6400000
Fraction By Weight: 2-8%
OSHA PEL 5000 PPM
ACGIH TLV: 9000 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: BURNING, IRRITATION. SKIN: MILD
IRRITATION. INHALATION: IRRITATION TO RESPIRATORY TRACT, CNS
DEPRESSION. REPEATED OVEREXPOSURE MAY CAUSE HARM TO THE NERVOUS
SYSTEM.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, HEADACHES
Medical Cond Aggravated by Exposure:PRE-EXISTING LUNG DISORDERS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NEEDED. EYES:
FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH THOROUGHLY
W/SOAP & WATER. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:<20F
Lower Limits:1
Upper Limits:19
Extinguishing Media:DRY CHEMICAL, FOAM, CO2
Unusual Fire/Explosion Hazard:AEROSOL CONTAINERS MAY EXPLODE WHEN
HEATED >130F. VAPORS GENERATED ARE EXTREMELY FLAMMABLE. VAPORS ARE
>THAN AIR & WILL COLLECT IN LOW AREAS.
Accidental Release
Spill Release Procedures:REMOVE SOURCE OF IGNITION. VENTILATE AREA.
ABSORB W/AN INERT ABSORBENT MATERIAL.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY AREA. USE PRODUCT
IN AREAS W/GOOD VENTILATION.
Exposure Controls
Respiratory Protection:USE SELF CONTAINED BREATHING APPARATUS ABOVE THE
TLV.
Ventilation:MAINTAIN VAPOR CONC
Protective Gloves:NEOPRENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NOT USUALLY REQUIRED W/AEROSOLS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:141F
Melt/Freeze Pt:M.P/F.P Text:<0F
Vapor Density:>1
Spec Gravity:0.692
Evaporation Rate & Reference:(BU AC =1): >1
Solubility in Water:PARTIAL
Appearance and Odor:CLEAR LIQUID W/ALCOHOL ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS/ACIDS/BASES
Stability Condition to Avoid:TEMP>130F, SOURCES OF IGNITION
Hazardous Decomposition Products:CO2, CO
Disposal
Waste Disposal Methods:ALL USED/UNUSED PRODUCT SHOULD BE DISPOSED OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.